Thread: Warhead data
View Single Post
  #68  
Old 11-07-2015, 07:44 PM
ArmySGT.'s Avatar
ArmySGT. ArmySGT. is offline
Internet Intellectual
 
Join Date: Jun 2011
Location: Colorado
Posts: 2,412
Default

For M102 Howitzer (KFS issue) towed behind one M35 2 1/2 ton truck.

Caliber: 105mm
Weight: 1500kg
ROF: 5 round per minute
Maximum range: 14,000 Meters
Feed Device: Single shot, screw type breech
Basic Load: 150 rounds
Ammunition types: HE, WP, Illum
Crew: 8



Name M1 105mm HE
E-Factor =
DPW = 6136 (2.63084kg Compostion B) or 3771 (2.17724kg TNT)
Wt. 39.92 lbs (18.107407 kg)
Eff. Range 11500m
Max. Range 11,500m
Burst Radius 25m
Type of Fire single shot, screw type breech
Rate of Fire Single
Feed Device n/a
Feed Device Wt. Manually loaded
Basic Load 150 rounds
Load Wt.
Total Wt.
Additional Comments:Very basic HE artillery shell. Maybe fitted with a variety of fuses for air burst (Variable Time (VT)) which is preferred, impact, delay, and contact fuses.
Limitations:
Functional reliability will be degraded when impacting soft targets such as marshy, sandy, clay, mud, or snow covered terrain.

Use:
The projectile of this cartridge contains high explosive and is used for fragmentation, blast, and mining in support of ground troops and armored columns.

Description:
The projectile consists of a hollow steel forging with a boattail base, a streamlined ogive, and gilding metal rotating band. A base cover is welded to the base of the projectile for
added protection against the entrance of hot gases from the propelling charge during firing. The high explosive (HE) filler within the projectile may be either cast TNT or Composition B. A fuze cavity is either drilled or formed in the filler at the nose end of the projectile. This cavity may be either shallow or deep. A cavity liner, to preclude dusting of HE during transportation and handling, is seated in the cavity and expanded into the lower projectile fuze threads. A supplementary charge is placed in the fuze cavity of projectiles having deep cavities. Projectiles with shallow cavities or deep cavities containing a supplementary charge use only short intrusion fuzes, PD, or MT. Those with deep cavities will accept the long intrusion proximity fuze after removing the supplementary charge. Projectiles may be shipped with a PD or MTSQ fuze or with a closing plug. When
shipped with a closing plug, a chip board spacer is assembled between the supplementary charge and plug to limit movement of the former during transportation and handling.
The cartridge case contains a percussion primer assembly and seven individually bagged and numbered propelling charge increments. The base of the cartridge case is drilled and the primer assembly is pressed into the base. The percussion primer assembly consists of a percussion ignition element and a perforated flash tube containing black powder. The seven numbered increment bags are tied together, in numerical order, with acrylic cord. These are assembled into the cartridge case, around the primer flash tube, with Increment 1 at the base of the cartridge case and Increment 7 toward the mouth of the cartridge case.

Functioning:
If the projectile is unfuzed, the closing plug is removed and a fuze assembled to the projectile prior to adjusting the charge and loading the cartridge into the weapon. Impact of the weapon firing pin results in the initiation of the percussion primer which, in turn, ignites the black powder in the flash tube. The flash tube provides for uniform ignition of the propelling charge producing a rapid expansion of the propellant gas which propels the projectile out of the weapon tube. Engagement of the projectile rotating band with the rifling of the weapon tube imparts spin to the projectile providing inflight stability. Projectile functioning is dependent upon the fuze used and may function on impact (instantaneous or delay), function above ground either at a predetermined height based upon time of flight or function in proximity with the target area. Fuze function detonates the HE projectile filler resulting in projectile fragmentation and blast.

Last edited by ArmySGT.; 11-07-2015 at 07:53 PM.
Reply With Quote