RPG Forums

Go Back   RPG Forums > Role Playing Game Section > Morrow Project/ Project Phoenix Forum

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-03-2017, 05:07 PM
tsofian tsofian is offline
Registered User
 
Join Date: Aug 2015
Posts: 342
Default Lasers against clear plexiglass?

I had another nasty thought for the corridor into Prime Base. The security post has lasers. It might be vulnerable to attack by shape charge warheads.

What if there are a number of plexiglass panels that can be placed to block the passageway? They are almost entirely transparent to the laser's wavelength. They could be fairly thick, enough to stop most bullets and to prevent the movement of people, and to trigger the detonation of shaped charge rockets and such. The Type 3 laser has an E Factor of 700 per second, so it can basically vaporize a human target every turn.
Reply With Quote
  #2  
Old 08-03-2017, 06:14 PM
mmartin798 mmartin798 is offline
Registered User
 
Join Date: Feb 2014
Location: Michigan
Posts: 659
Default

Quote:
Originally Posted by tsofian View Post
I had another nasty thought for the corridor into Prime Base. The security post has lasers. It might be vulnerable to attack by shape charge warheads.

What if there are a number of plexiglass panels that can be placed to block the passageway? They are almost entirely transparent to the laser's wavelength. They could be fairly thick, enough to stop most bullets and to prevent the movement of people, and to trigger the detonation of shaped charge rockets and such. The Type 3 laser has an E Factor of 700 per second, so it can basically vaporize a human target every turn.
If we assume that the Project lasers are tuned to be in the IR part of the spectrum, we still have problems with plexiglass. Being almost transparent is a problem with a laser wattage of 800KW at full power. Also, if the plexiglass is thick enough to stop a bullet, then the IR transparency is significantly less. A 3rd edition Mark 3/4th edition Mark 1 laser will shred the plexiglass in short order if fired through it.
Reply With Quote
  #3  
Old 08-04-2017, 05:06 AM
tsofian tsofian is offline
Registered User
 
Join Date: Aug 2015
Posts: 342
Default

How about some other material?
Reply With Quote
  #4  
Old 08-04-2017, 08:13 AM
mmartin798 mmartin798 is offline
Registered User
 
Join Date: Feb 2014
Location: Michigan
Posts: 659
Default

There are many materials that have better thermal properties than Plexiglass with good IR transmission. There is one material that seems to be the best fit for your application, aluminium oxynitride. Commercially available under the name ALON, when in thicknesses of 1.6" it is more effective at stopping .50 BMG than 3.7" of glass laminate and is lighter. It comes in 18x35 inch sheets, so your array of panels is possible. Probably not cheap though.

Found an actual report on the .50 BMG test. The ALON was a 1.6" laminate. The laminate material could degrade or fail from repeated laser blasts. So the panes will be thicker than 1.6", but you should still be able to get the desired results.

Last edited by mmartin798; 08-04-2017 at 09:06 AM. Reason: Additional information
Reply With Quote
  #5  
Old 08-04-2017, 10:13 AM
cosmicfish cosmicfish is offline
Registered User
 
Join Date: Mar 2015
Posts: 477
Default

ALON won't work. Optical extinction is down around 0.075/cm in the 1-2 um range (the best IR or visible case for this material), which means that for a 2" thickness you would be dumping about 30% of the laser energy into the material. That would be catastrophic for any kind of laser weapon even though you could see through it.

There is no real material that is both a good armor material AND optically clear at a useful wavelength. I would suggest just using turrets or firing ports, but you could always just handwave a new miracle material if you really want to do this - just don't try to pretend it is a real material.
Reply With Quote
  #6  
Old 08-04-2017, 12:20 PM
mmartin798 mmartin798 is offline
Registered User
 
Join Date: Feb 2014
Location: Michigan
Posts: 659
Default

Quote:
Originally Posted by cosmicfish View Post
ALON won't work. Optical extinction is down around 0.075/cm in the 1-2 um range (the best IR or visible case for this material), which means that for a 2" thickness you would be dumping about 30% of the laser energy into the material. That would be catastrophic for any kind of laser weapon even though you could see through it.
Yeah, I didn't think that through far enough. Even with the higher melting point, the thermal conductance is too low to allow the heat from attenuating the beam to be siphoned away.
Reply With Quote
  #7  
Old 08-04-2017, 06:13 PM
tsofian tsofian is offline
Registered User
 
Join Date: Aug 2015
Posts: 342
Default

OK, I'll just use chicken wire.
Reply With Quote
  #8  
Old 08-05-2017, 07:42 AM
dragoon500ly dragoon500ly is offline
Registered User
 
Join Date: Oct 2010
Location: East Tennessee, USA
Posts: 2,873
Default

I understand what you are trying to do, instead of plexiglass, or chicken wire, go old school. A series of barred grates can be dropped into place. The bars and cross pieces can be no thicker than a rod of rebar, it will hinder movement along the tunnel, while providing a missile Unum of cover and protection from intruders. The fire-control can be programmed to direct the lasers fire to avoid the grates. Certainly it may mean a glancing shot rather than a kill shot, but it will prevent any attempts to emplace demo charges, and if 2-4 lasers are placed, then multiple firing angles can be achieved.
__________________
The reason that the American Army does so well in wartime, is that war is chaos, and the American Army practices chaos on a daily basis.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:32 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.