RPG Forums

RPG Forums (https://forum.juhlin.com/index.php)
-   Twilight 2000 Forum (https://forum.juhlin.com/forumdisplay.php?f=3)
-   -   Tank graveyard (https://forum.juhlin.com/showthread.php?t=4952)

Legbreaker 09-10-2015 10:07 PM

Quote:

Originally Posted by ArmySGT. (Post 66977)

Hmm, so why is a supposedly Russian made rocket pod (#23 for example) clearly printed in English?

Olefin 09-11-2015 07:34 AM

Quote:

Originally Posted by swaghauler (Post 66966)
A quick question while we are putting all these older AFVs back into service. Where is all the gas (or if its European, diesel) coming from? An M4 Sherman (indeed most WW2 AFVs from the US) use older gas engines. These had points, carbs and floats that would have to be changed to enable the use of ethanol (methanol won't work in these older engines). Who's fabricating the new piston rings, bucket tappets, and lifter springs that will be needed to withstand the higher burn temps of ethanol? There is this idea out there that all of these older vehicles are "plug and play" with alternative fuels just like the newer "FlexFuel" cars mandated in the US today. Nothing could be further from the truth. In fact, the major reason the US didn't switch to ethanol or a gas/ethanol mixture during the Oil Crisis was the inability of older gas engines to use ethanol without damage. I remember the old jeeps and gamma-goats; They wouldn't run properly if there was too much water in the gas.

You would have to switch them over to run on ethanol and methanol - just as was done with thousands of other vehicles in the game. I didnt say you would be able to just fire them up and take them out (now if you had gasoline or diesel thats different - and most of the older vehicles I am talking about ran on diesel by the way - unless you are talking WWII vehicles only)

By the way FYI - the Super Sherman that Littlefield has that has the live barrel and is 100% operational that he got from Israel - it has a diesel engine

"Quote:
Originally Posted by Olefin
The Mexican Army is not trained to take on armored forces - they are basically an anti-insurgency force, not a force trained to take on tanks. Now could they have been trained to do this - yes, at least the initial forces that were sent into the US. However I am betting that by 2001 the replacement conscripts that make up most of their forces didnt get much in the way of training before they got sent into the US.

Ridiculous. The Mexican infantry trains for anti-armor missions just like any other. They field an assortment of anti-armor weapons throughout their organization. The Mexicans in real life field recoilless rifles and these is a far easier round and fuse to manufacture. The Mexicans may have a far more robust AT defense in T2K given M40A1 106mm RRs in the force structure. M3 Carl Gustaf RRs at company level too, again a far easier round to manufacture. Both are essentially fuse superquick and the warhead is HEAT. "


Its one thing to be trained in how to use a weapons system - its another to be trained to use alternate ways to take out a tank other than a bottle of flaming gasoline. And the Mexican Army, as per multiple canon references and also real life references, is mostly a conscript army that is specifically trained to take on rebels, not armored forces.

Thats why in the game they needed Division Cuba - because the Soviets in Cuba had what they didnt have - a fully armed and equipped division armed with tanks and anti-tank weapons. Thats what stopped the 36th in its tracks during the counterattack.

And if the Mexicans are so well trained against tanks then why does a force that includes APC's and anti-tank weapons basically get butchered by the Soviets during the taking of Brownsville - per the module if they get there they only lose a single BTR against a large well equipped marauder force?

By what is being said here by several people that Soviet force, which only included BTR's and trucks, no tanks of any sort, which had no artillery support by the way, with all its infantry mounted in vehicles, should have been butchered left and right by all those veteran soldiers that were part of what was described as a very well equipped and trained Mexican marauder force (they were Mexican Army that had went marauder) - so that shows the reality of what armor does to marauder forces in the game

If they couldnt stop a small force of BTR's in an urban assualt that were unsupported by artillery then I highly doubt they could have handled tanks

Olefin 09-11-2015 07:59 AM

And as for parts and ammo - keep in mind that the US in real life had a lot of old M48's still sitting in storage or waiting for transfer to other armies or for disposal as well as ammunition for those tanks in storage - and one of the biggest of those stowage yards is in Northern California

and the M48 and M60 tank share a lot of parts -meaning that its not that big a logistical leap to keep M48's going that come out of the tank graveyards, storage areas or museums

remember the M88 recovery vehicle had a lot of parts that came from both the M48 and the M60 - meaning that parts procured for that vehicle will also work to repair and keep going an M48 in the field

so those old M48's and older model M60's would actually be quite easy to keep going in the field once you brought them back into action - including ammo and spare parts - not as easy as an M1 - but it could be done for a country desperate for tanks and armored vehicles - which pretty much describes the US after Omega

ArmySGT. 09-11-2015 08:09 AM

Quote:

Originally Posted by Olefin (Post 66986)

Its one thing to be trained in how to use a weapons system - its another to be trained to use alternate ways to take out a tank other than a bottle of flaming gasoline. And the Mexican Army, as per multiple canon references and also real life references, is mostly a conscript army that is specifically trained to take on rebels, not armored forces.

Thats why in the game they needed Division Cuba - because the Soviets in Cuba had what they didnt have - a fully armed and equipped division armed with tanks and anti-tank weapons. Thats what stopped the 36th in its tracks during the counterattack.

And if the Mexicans are so well trained against tanks then why does a force that includes APC's and anti-tank weapons basically get butchered by the Soviets during the taking of Brownsville - per the module if they get there they only lose a single BTR against a large well equipped marauder force?

By what is being said here by several people that Soviet force, which only included BTR's and trucks, no tanks of any sort, which had no artillery support by the way, with all its infantry mounted in vehicles, should have been butchered left and right by all those veteran soldiers that were part of what was described as a very well equipped and trained Mexican marauder force (they were Mexican Army that had went marauder) - so that shows the reality of what armor does to marauder forces in the game

If they couldnt stop a small force of BTR's in an urban assualt that were unsupported by artillery then I highly doubt they could have handled tanks

I don't understand what you are trying to say. This has no coherent beginning, middle, or end.

ArmySGT. 09-11-2015 08:13 AM

Quote:

Originally Posted by Olefin (Post 66988)
And as for parts and ammo - keep in mind that the US in real life had a lot of old M48's still sitting in storage or waiting for transfer to other armies or for disposal as well as ammunition for those tanks in storage - and one of the biggest of those stowage yards is in Northern California

and the M48 and M60 tank share a lot of parts -meaning that its not that big a logistical leap to keep M48's going that come out of the tank graveyards, storage areas or museums

remember the M88 recovery vehicle had a lot of parts that came from both the M48 and the M60 - meaning that parts procured for that vehicle will also work to repair and keep going an M48 in the field

so those old M48's and older model M60's would actually be quite easy to keep going in the field once you brought them back into action - including ammo and spare parts - not as easy as an M1 - but it could be done for a country desperate for tanks and armored vehicles - which pretty much describes the US after Omega


Sierra Army Depot is in Northern California.. It is a huge ammunition and vehicle depot. If it wasn't heavily nuked in canon it should have been.

The majority of M48s I have seen are used as targets on live fire ranges.

I have shot them up with Mk19s and AT-4. The Air Force drops bombs on them and the Artillery uses them as armor in the open targets and for FOs to practice lasing a target.

That is where the majority of U.S. M48s not transferred in sales to foreign countries reside. Live fire impact areas.

Olefin 09-11-2015 08:27 AM

yes they did use them as targets in real life - but they also held a lot of them for sale to foreign nations - in that time period the US still had hundreds of them in storage in Italy for instance

So they definitely still had them available for their own forces - and for people like the Turks and Koreans who still operated them

Olefin 09-11-2015 08:41 AM

Quote:

Originally Posted by ArmySGT. (Post 66990)
I don't understand what you are trying to say. This has no coherent beginning, middle, or end.

Actually it has a very coherent point

According to you and others marauder forces, especially those composed of trained military men, should be able to deal with tanks easily, especially if they arent supported by artillery. You can easily peel off their supporting infantry and take them out.

So what do you have at Brownsville in the Texas module - a very well armed marauder force which was a Mexican Brigade that had turned marauder but which was still organized and had officers and NCO's. They had APC's, anti-tank missiles and were well equipped per the module.

They got attacked by a small column of Russian armored vehicles who had no artillery or air support.

With what has been said here that Russian force should have been butchered. But what happened - they lost a single BTR in the attack, butchered the Mexican force and took Brownsville with very low casualties

thus, in the minds of the people who created the game, they didnt see Mexican Army or typical marauders able to take on armor and win

and while they mentioned the characters, who had fought in Europe, knew how to take on tanks, the Mexicans and marauder forces in Texas specifically were mentioned as not knowing how to deal with them because they hadnt been exposed to armored warfare as in Europe

I.e. they may have had guys who had seen old movies on throwing a bottle of flaming gasoline at tanks and they had a few guys trained to fire RPG's - but other than that all they knew how to do when armor showed up was run - and those were Mexican troops

ArmySGT. 09-11-2015 10:30 AM

Quote:

Originally Posted by Olefin (Post 66994)
Actually it has a very coherent point

According to you and others marauder forces, especially those composed of trained military men, should be able to deal with tanks easily, especially if they arent supported by artillery. You can easily peel off their supporting infantry and take them out.

So what do you have at Brownsville in the Texas module - a very well armed marauder force which was a Mexican Brigade that had turned marauder but which was still organized and had officers and NCO's. They had APC's, anti-tank missiles and were well equipped per the module.

They got attacked by a small column of Russian armored vehicles who had no artillery or air support.

With what has been said here that Russian force should have been butchered. But what happened - they lost a single BTR in the attack, butchered the Mexican force and took Brownsville with very low casualties

thus, in the minds of the people who created the game, they didnt see Mexican Army or typical marauders able to take on armor and win

and while they mentioned the characters, who had fought in Europe, knew how to take on tanks, the Mexicans and marauder forces in Texas specifically were mentioned as not knowing how to deal with them because they hadnt been exposed to armored warfare as in Europe

I.e. they may have had guys who had seen old movies on throwing a bottle of flaming gasoline at tanks and they had a few guys trained to fire RPG's - but other than that all they knew how to do when armor showed up was run - and those were Mexican troops

Because the authors wanted it to happen that way. Simply because for all the points you mention they should have slaughtered the Russians.

.50 BMG passes right through what little armor a BTR has.

Quote:

Originally Posted by Olefin (Post 66994)
Actually it has a very coherent point

Now, back to what I said earlier...... I can't make sense of that post. I read it three times. Could you edit that and clarify it? One subject per paragraph, one sentence with the argument and main point, then supporting evidence in other sentences. Please.

Seriously, it is like an episode of drunk history. I thought I was bad about automatic writing and spilling it out as it has come to mind.

unkated 09-11-2015 11:06 AM

Quote:

Originally Posted by swaghauler (Post 66966)
A quick question while we are putting all these older AFVs back into service. Where is all the gas (or if its European, diesel) coming from? An M4 Sherman (indeed most WW2 AFVs from the US) use older gas engines. These had points, carbs and floats that would have to be changed to enable the use of ethanol (methanol won't work in these older engines). Who's fabricating the new piston rings, bucket tappets, and lifter springs that will be needed to withstand the higher burn temps of ethanol?

The easiest way would be to pull the engine and replace it with a more modern truck engine of comparable power.

Now, note that I said "easiest", not that it would be easy. It would take a well-equipped garage and a knowledgeable team to do so. But it would probably be easier than to locate working antique replacement parts, or get the specs to some mechanical artist with a well-equipped machine shop to make them from scratch.

Uncle Ted

unkated 09-11-2015 11:15 AM

Legbreaker, next time post pictures that are less controversial, like scantily clad women, or perhaps political cartoons. Those never cause trouble :rolleyes:

Uncle Ted

ArmySGT. 09-11-2015 11:21 AM

Quote:

Originally Posted by Legbreaker (Post 66979)
Hmm, so why is a supposedly Russian made rocket pod (#23 for example) clearly printed in English?

You know, that is curious. I would just have to guess that English was better understood by the plethora of international techs that Qaddafi had to hire to keep shit in the air.

Olefin 09-11-2015 11:36 AM

Quote:

Originally Posted by ArmySGT. (Post 66996)
Because the authors wanted it to happen that way. Simply because for all the points you mention they should have slaughtered the Russians.

.50 BMG passes right through what little armor a BTR has.

Now, back to what I said earlier...... I can't make sense of that post. I read it three times. Could you edit that and clarify it? One subject per paragraph, one sentence with the argument and main point, then supporting evidence in other sentences. Please.

Seriously, it is like an episode of drunk history. I thought I was bad about automatic writing and spilling it out as it has come to mind.

Army SGT - what I posted makes very good sense to me and there is nothing wrong with my writing style - and frankly if you are trying to bait me to break the board rules you are not going to get anywhere

Olefin 09-11-2015 11:38 AM

Quote:

Originally Posted by unkated (Post 66997)
The easiest way would be to pull the engine and replace it with a more modern truck engine of comparable power.

Now, note that I said "easiest", not that it would be easy. It would take a well-equipped garage and a knowledgeable team to do so. But it would probably be easier than to locate working antique replacement parts, or get the specs to some mechanical artist with a well-equipped machine shop to make them from scratch.

Uncle Ted

or just do a straight convert to allow it run on alcohol - if the Soviets did it with T-55's then you can do it with an M48

CDAT 09-11-2015 12:03 PM

Quote:

Originally Posted by ArmySGT. (Post 66977)
http://www.theatlantic.com/photo/201...rebels/100086/

Pictures #20 and #21 is guy reusing RPGs.

Yes as a HE not HEAT round.

Olefin 09-11-2015 12:07 PM

and HE is much easier to make in a backyard/small machine shop environment than a HEAT round

CDAT 09-11-2015 12:18 PM

Quote:

Originally Posted by ArmySGT. (Post 66996)
Because the authors wanted it to happen that way. Simply because for all the points you mention they should have slaughtered the Russians.

.50 BMG passes right through what little armor a BTR has.

Now, back to what I said earlier...... I can't make sense of that post. I read it three times. Could you edit that and clarify it? One subject per paragraph, one sentence with the argument and main point, then supporting evidence in other sentences. Please.

Seriously, it is like an episode of drunk history. I thought I was bad about automatic writing and spilling it out as it has come to mind.

With the .50 is that first hand experience or just hearsay? I ask because several things that I had been told were fact, when we got the chance to test for our self found out to be untrue. I was told that within one magazine of 5.56 you would chew through the armor of a M113, the 7.62X51 would go in and bounce around, and the .50 would make Swiss cheese out of it. When we go the chance to shoot one (OK it was an old ITV), after hundreds of rounds of 5.56 you were hard pressed to find any place that looked like it had taken any real damage. The 7.62 just left tiny little marks, and the .50 BMG left pock marks. This was with green/black tip. Right before us was some Brits and there Warriors with TP ammo did not even penetrate, it did leave nice sized dents were each round hit, had it been war stock ammo I have no doubt that it would have penetrated.


Olefin I also thought that it made sense, if you are looking at this objectively. If you are looking at it with rose colored lenses it may not.

swaghauler 09-11-2015 12:31 PM

Quote:

Originally Posted by unkated (Post 66997)
The easiest way would be to pull the engine and replace it with a more modern truck engine of comparable power.

Now, note that I said "easiest", not that it would be easy. It would take a well-equipped garage and a knowledgeable team to do so. But it would probably be easier than to locate working antique replacement parts, or get the specs to some mechanical artist with a well-equipped machine shop to make them from scratch.

Uncle Ted

This is where I have major problems with the cannon (and changed my game's history accordingly). If Russia wanted to prevent the US from supplying/directing the war in Europe; They would have detonated several large nukes at altitude over the US and let the EMP destroy the computer modules present in almost all the machines (including engines) from the early 90's on (and we would have retaliated accordingly). You would need one of these newer engines (built to take the higher operating temperatures of ethanol) in order to build a motor that lasts. The EMP effect would have rendered most "soft-skinned" military vehicles "dead" as well. These vehicles were too numerous for even the US Army to "harden" the chips in their engine control module. There would be as many soft skinned vehicles left (not many) as armored vehicles (those vehicles being "hardened"). On the upside, there would be plenty of non-computerized parts for the remaining vehicles. This also speaks to the use of older vehicles (which were not computerized) by everyone. These older vehicles would still see limited use because they suffer damage from the use of ethanol (shortening their lifespan very quickly). Also, contrary to the cannon, gas powered vehicles cannot use methanol; There's not enough energy in methanol for effective combustion to occur. Methanol can be used in the manufacture of biodiesel (replacing the pint of ethanol per gallon of oil needed to enhance combustion) but it reduces the effectiveness of the fuel (biodiesel made with ethanol has the same economy as regular diesel). Diesel engines would be the true "workhorse" in Twilight because any fuel the engine can atomize, it can burn (including kerosene, methanol/ethanol & vegetable oil, fuel oil, old motor oil cut with dry gas, and even Propane or natural gas). The problem would be that newer 90's diesel engines were computerized (and are now not operational). This approach makes a vehicle a rare and valuable resource to be treasured.
If you would like more information on fuel and alternative fuels for military operations; Get a copy (you can download them) of the Petroleum Specialist's Handbook (MOS 77Fox) from the Army. The American Petroleum Institute also has information on fuels and their uses.

swaghauler 09-11-2015 12:37 PM

1-800-REDLEG
 
Quote:

Originally Posted by robert.munsey (Post 66958)
Yes the tanks are! Don't listen to the "light Fighter" Hype!

We just need grunts as much as they need us.......

And when the s*** really hits the fan, who do you BOTH call.... The KING OF BATTLE... The Field Artillery! Infantry...ICM. Tanks...ICM-DP or HEAT.

1-800-REDLEG..... When it ABSOLUTELY, POSITIVELY, HAS TO BE DESTROYED! :)

Olefin 09-11-2015 12:51 PM

Quote:

Originally Posted by swaghauler (Post 67007)
And when the s*** really hits the fan, who do you BOTH call.... The KING OF BATTLE... The Field Artillery! Infantry...ICM. Tanks...ICM-DP or HEAT.

1-800-REDLEG..... When it ABSOLUTELY, POSITIVELY, HAS TO BE DESTROYED! :)

Actually I will agree with you there if you have the guns

Nothing says "Goodbye Ivan!" like several batteries of 105's and 155's doing a time on target mission

ArmySGT. 09-11-2015 12:58 PM

Quote:

Originally Posted by Olefin (Post 67000)
Army SGT - what I posted makes very good sense to me and there is nothing wrong with my writing style - and frankly if you are trying to bait me to break the board rules you are not going to get anywhere

No. I am asking you to write it again, to clarify. I can pick the parts out of it, but it is a very confusing read. You're jumping back and forth. Editing that would make it readable and your point clear.

ArmySGT. 09-11-2015 01:02 PM

Quote:

Originally Posted by CDAT (Post 67002)
Yes as a HE not HEAT round.

HEAT is an inverted cone with a detonator affixed in front equal to the depth of the cone. This focuses the blast like a Fresnel lens..... no magic or complicated machining.... The copper cone the HE is applied to on the back side is a stamped sheet of copper.

This is late 1930's refined bazooka or late 1940s panzerfaust technology not Javelin or Bill.

unkated 09-11-2015 01:04 PM

Quote:

Originally Posted by swaghauler (Post 67006)
This is where I have major problems with the cannon (and changed my game's history accordingly). If Russia wanted to prevent the US from supplying/directing the war in Europe; They would have detonated several large nukes at altitude over the US and let the EMP destroy the computer modules present in almost all the machines (including engines) from the early 90's on (and we would have retaliated accordingly).

This is where I have a problem with how many of you interpret the exchange of nukes:

According to cannon, the use of nukes was limited and stopped before it became large or excessively threatening to either side. Neither side launched so large or threatening a strike that the opposition felt they had no choice but massive retaliation.

Had they done so, we'd be playing Midnight:2000, which would be short, as characters would wander for a few months until they died of radiation poisoning.

So, in this case, for example, the Soviets did not launch an EMP strike out of fear of immediate retaliation - and as a power that was trying to coordinate a two front war, had more to lose from an EMP strike. Or worse, scaring the US into a major counterstrike before US communications degraded beyond the point where they could command one. You avoid that by not degrading the US communications via EMP strikes.

Uncle Ted

ArmySGT. 09-11-2015 01:06 PM

Quote:

Originally Posted by swaghauler (Post 67006)
The EMP effect would have rendered most "soft-skinned" military vehicles "dead" as well. These vehicles were too numerous for even the US Army to "harden" the chips in their engine control module.

The control modules on HMMWVs is hardened against EMP since the beginning in the 80s. Even without the computer the HMMWV will run with its mechanical fuel pump. The 2 1/2s and 5 tons are also hardened against EMP.. big solid state component on the starters and control modules.

The computers help them to run BETTER, be more fuel efficient, and in better compliance with EPA emissions regulations. The still run without them.

CDAT 09-11-2015 01:26 PM

Quote:

Originally Posted by ArmySGT. (Post 67013)
HEAT is an inverted cone with a detonator affixed in front equal to the depth of the cone. This focuses the blast like a Fresnel lens..... no magic or complicated machining.... The copper cone the HE is applied to on the back side is a stamped sheet of copper.

This is late 1930's refined bazooka or late 1940s panzerfaust technology not Javelin or Bill.

You may want to look a bit more into this, in a nut shell you are right, however the angle of the cone and the stand off must be just right or it will not work well, maybe even less effective (depending on how off they are) than just basic HE. Getting the timing right so that when the round goes off by the time the jet is formed it is at the correct distance is complicated.

ArmySGT. 09-11-2015 02:13 PM

Quote:

Originally Posted by CDAT (Post 67016)
You may want to look a bit more into this, in a nut shell you are right, however the angle of the cone and the stand off must be just right or it will not work well, maybe even less effective (depending on how off they are) than just basic HE. Getting the timing right so that when the round goes off by the time the jet is formed it is at the correct distance is complicated.

It isn't.........it is the opposite of the depth of the cone. This is why cratering charges and limpet mines have legs.

robert.munsey 09-11-2015 03:34 PM

Quote:

Originally Posted by ArmySGT. (Post 66969)
What do you call four tankers .......<snip>
What is closed up tight, covered in oil, and stinks to high heaven? You might have said tankers, but I meant canned fish.

You really are a Infantry troll aren't you?

CDAT 09-11-2015 03:43 PM

Quote:

Originally Posted by ArmySGT. (Post 67018)
It isn't.........it is the opposite of the depth of the cone. This is why cratering charges and limpet mines have legs.

Well I am done trying to help you, as you know more then those of us who this is what we did. Long live the Light Infantry they can do more than anyone else.

robert.munsey 09-11-2015 03:49 PM

Quote:

Originally Posted by ArmySGT. (Post 67018)
It isn't.........it is the opposite of the depth of the cone. This is why cratering charges and limpet mines have legs.

You idiot, it is not the distance outside the cone, it is the depth of the cone that has to be right. Along with the angle.
The road cratering charges are built a certain way and the legs are not part of the stand off. When was the last time you employed one? Get your facts straight.

ArmySGT. 09-11-2015 03:52 PM

Quote:

Originally Posted by robert.munsey (Post 67024)
You idiot, it is not the distance outside the cone, it is the depth of the cone that has to be right. Along with the angle.
The road cratering charges are built a certain way and the legs are not part of the stand off. When was the last time you employed one? Get your facts straight.

Didn't I just say that? Inverted and opposite....... If the cone is 6 inches deep and 30 degrees the focus point is opposite of this ........ 6 inches in front.

Oh.........that is exactly why the legs exist.......the stand off for the plasma jet from the shaped charge.

http://pl.b5z.net/i/u/6070324/i/Iner...ped_Charge.jpg

ArmySGT. 09-11-2015 03:56 PM

Quote:

Originally Posted by CDAT (Post 67022)
Well I am done trying to help you, as you know more then those of us who this is what we did. Long live the Light Infantry they can do more than anyone else.

My secondary MOS in 11B, my primary is 95B..... Which I think became 31B in the force restructure. Which means I had to learn to do more with even less.

No artillery, no Manpads, No mortars, AT4 and AT mines in the defense.

I got a truck and pistol though.

I support the Three, Follow Me!

ArmySGT. 09-11-2015 04:06 PM

Quote:

Originally Posted by CDAT (Post 67005)
With the .50 is that first hand experience or just hearsay? I ask because several things that I had been told were fact, when we got the chance to test for our self found out to be untrue. I was told that within one magazine of 5.56 you would chew through the armor of a M113, the 7.62X51 would go in and bounce around, and the .50 would make Swiss cheese out of it. When we go the chance to shoot one (OK it was an old ITV), after hundreds of rounds of 5.56 you were hard pressed to find any place that looked like it had taken any real damage. The 7.62 just left tiny little marks, and the .50 BMG left pock marks. This was with green/black tip. Right before us was some Brits and there Warriors with TP ammo did not even penetrate, it did leave nice sized dents were each round hit, had it been war stock ammo I have no doubt that it would have penetrated.

Now I am talking about the BTR-60 and BTR-70. Can't say for the -80 or -90 from the side.

The M113 is rated for 7.62N AP ammo.... So that is what is supposed to happen. 7.62N in AP has black tips.

.50 BMG does penetrate especially SLAP to ricochet around the inside, still takes more than one strike at zero degrees deflection in the same place. M113s are also rated against 155mm / 152mm shell fragments though I can't remember if it is 20 meters or 50 meters from point of detonation.


Quote:

Originally Posted by CDAT (Post 67005)
Olefin I also thought that it made sense, if you are looking at this objectively. If you are looking at it with rose colored lenses it may not.

Let's stick to the discussion.

robert.munsey 09-11-2015 04:08 PM

Quote:

Originally Posted by ArmySGT. (Post 67025)
Didn't I just say that? Inverted and opposite....... If the cone is 6 inches deep and 30 degrees the focus point is opposite of this ........ 6 inches in front.

Oh.........that is exactly why the legs exist.......the stand off for the plasma jet from the shaped charge.

They existed for the old M3 not the current cratering charges brother. The legs on the old M3 Cratering charge did not exist for stand off.
Check your facts, it is not for the plasma jet. Ask your C-IED trainers in your unit for the real facts on EFP warheads.

robert.munsey 09-11-2015 04:12 PM

Quote:

Originally Posted by ArmySGT. (Post 67028)
Now I am talking about the BTR-60 and BTR-70. Can't say for the -80 or -90 from the side.

Let's stick to the discussion.

At what range is the US M61 AP going to penetrate the side of a BTR-60?

ArmySGT. 09-11-2015 04:14 PM

Quote:

Originally Posted by CDAT (Post 67022)
Well I am done trying to help you, as you know more then those of us who this is what we did. Long live the Light Infantry they can do more than anyone else.

I have a solution!
http://i81.photobucket.com/albums/j2...icture%202.png

ArmySGT. 09-11-2015 04:18 PM

Quote:

Originally Posted by robert.munsey (Post 67029)
They existed for the old M3 not the current cratering charges brother. The legs on the old M3 Cratering charge did not exist for stand off.
Check your facts, it is not for the plasma jet. Ask your C-IED trainers in your unit for the real facts on EFP warheads.

When did Explosively Formed Penetrators (EFP)s, formerly called platter charges..... Become cratering charges?

EFPs are for attacking armor from the side by punching a slug through the armor not burning a hole in armor with a hot plasma jet.

So before you want to insult me........and tell me what is what.....

ArmySGT. 09-11-2015 04:21 PM

Quote:

Originally Posted by robert.munsey (Post 67030)
At what range is the US M61 AP going to penetrate the side of a BTR-60?

Welded steel[2]
7 mm at 86° hull upper front[2][6]
9 mm at 47° hull lower front[2][6]
7 mm hull sides[6]
5 mm hull upper rear[6]
7 mm hull lower rear[6]
5 mm hull floor[6]
7 mm hull roof[6]
10 mm turret front[9]
7 mm turret sides[6]
7 mm turret sear[6]
7 mm turret roof[6]

Olefin 09-11-2015 04:39 PM

Quote:

Originally Posted by ArmySGT. (Post 67032)
When did Explosively Formed Penetrators (EFP)s, formerly called platter charges..... Become cratering charges?

EFPs are for attacking armor from the side by punching a slug through the armor not burning a hole in armor with a hot plasma jet.

So before you want to insult me........and tell me what is what.....

actually you have been doing that quite enough on your own - lets dial it down a little shall we?

robert.munsey 09-11-2015 04:41 PM

Quote:

Originally Posted by ArmySGT. (Post 67028)
Now I am talking about the BTR-60 and BTR-70. Can't say for the -80 or -90 from the side.

Quote:

Originally Posted by ArmySGT. (Post 67033)
Welded steel[2]
7 mm at 86° hull upper front[2][6]
9 mm at 47° hull lower front[2][6]
7 mm hull sides[6]
5 mm hull upper rear[6]
7 mm hull lower rear[6]
5 mm hull floor[6]
7 mm hull roof[6]
10 mm turret front[9]
7 mm turret sides[6]
7 mm turret sear[6]
7 mm turret roof[6]

Wow ok, you can quote the armor thickness of the BTR. You still did not answer the question.
So I will repeat it;
What range does the 7.62mm M61 penetrate the side of the BTR-60 (we will keep it easy for you).

ArmySGT. 09-11-2015 04:42 PM

Quote:

Originally Posted by Olefin (Post 67035)
actually you have been doing that quite enough on your own - lets dial it down a little shall we?

No. I have stuck deliberately to the subject without the name calling. Stick to the subject.

Ok, the Branch jokes I will take responsibility for. Those are unspecific to the individual.

ArmySGT. 09-11-2015 04:46 PM

Quote:

Originally Posted by robert.munsey (Post 67036)
Wow ok, you can quote the armor thickness of the BTR. You still did not answer the question.
So I will repeat it;
What range does the 7.62mm M61 penetrate the side of the BTR-60 (we will keep it easy for you).

Quote:

Originally Posted by ArmySGT. (Post 66996)
.50 BMG passes right through what little armor a BTR has.

Let me keep it easy for you. I didn't say 7.62N even AP when I spoke of hull penetrations through the side armor of BTR-60s and 70s....

So you misquoted me to begin with.


All times are GMT -6. The time now is 01:35 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.