Quote:
Originally Posted by CDAT
Ease of Maintenance: AK
For this I do not know what the expected level of operator maintenance is for the AK, but will say that it is easier to field strip, not that the M16 is difficult, the biggest issue I see for the M16 is it does have some small parts that could be lost in the dark or what not.
|
I based this off of much anecdotal evidence. I once saw a video of a rusted AKM found in a hole in the ground in Mozambique. It was covered in rust. The finder poured some motor oil over it and was able to fire it. I've never seen or heard of a similar feat with an M16.
Also, the AK is reputed to require less frequent cleaning. This, I think, makes maintaining it easier.
I don't like field stripping my AR-15. As you pointed out, too many little parts. The AK-47/AKM has fewer parts. This make maintenance easier too.
Quote:
Originally Posted by CDAT
Stopping Power: AK
At the barrel, The AK47 has 1502ft/lb (2036 J), the AK74 has 979ft/lb (1328 J), and the M16 1302ft/lb (1764 J). So the AK47 is the winner here, but the AK74 is in last place, so I would not say AK, as you are bouncing between AK47 and AK74. The AK47 also has the best penetration.
|
I only mentioned the development of the AK74. It wasn't really included in the comparison, but thanks for including it in your assessment.
Quote:
Originally Posted by CDAT
Ergonomics: M16 (this is why the HK416 and SIG 716 & MCX pretty much copy everything about the M4 other than its operation)
This is one more thing that I am not going to get into, as I have never carried the AK for extended periods of time. I have used it for training and teaching others, for this is was fine, but I have thousands of hours on the M16 so not sure it is better ergonomics or just more familiarity.
|
One of the biggest knocks on the ergonomics of the AK series is the safety/selector switch mounted on the right side of the receiver. It can't be operated without removing one hand- usually the right hand (for most, the dominant/shooting hand)- from the weapon. This is a major design flaw.
It's also reputedly quite loud. I've read numerous accounts of LRRPs and SOG recon teams in Vietnam being tipped off to an impending ambush by the loud CLACK of AKs being taken off safe.
Quote:
Originally Posted by CDAT
Durability: AK
This is the same as the reliability.
|
To an extent, but not really. I was thinking more of what would happen if one tried to butt-stroke an enemy. The M16's plastic stock is a lot less sturdy than most models of AK-47/AKM, many of which have a metal buttplate in addition to a wood butt. The M16's foregrip is less sturdy as well.