RPG Forums

Go Back   RPG Forums > Role Playing Game Section > Morrow Project/ Project Phoenix Forum
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-25-2015, 08:08 PM
RandyT0001's Avatar
RandyT0001 RandyT0001 is offline
Registered User
 
Join Date: Oct 2013
Posts: 254
Default Distribution of MP Teams

The default level of the MP is the medium level with 10,000 to 50,000 personnel. Given a few assumptions: 1), each team averages six members, 2), the contiguous states are about 3,000,000 square miles of land area, and 3), PB has about 600 personnel and PB2 has about 400 personnel we can determine an average area per team. Starting with the minimum of 10,000 MP personnel, we can make this determination.

10,000 – 1,000 (PB & PB2) = 9,000 team personnel
9,000 / 6 = 1,500 facilities, boltholes, bases
3,000,000 / 1,500 = 2,000 square miles per team
Square root of 2,000 = 44.721 miles

Each square is 44 miles by 44 miles. Each square has a six-person team assigned to it. The grid does not conform to the map due to the type of projection. The grid shown has 420 squares or teams (2,520 personnel) and represents 28% of the total number of MP teams.

Now, let us change the size from 10,000 members to 50,000 members where PB has 3,000 and PB2 has 2,000 personnel respectively. In this version each square has 30 MP personnel (15,120 total for the area presented).

Now, the question is "How big is your Morrow Project?"
Attached Images
 
Reply With Quote
  #2  
Old 09-25-2015, 08:43 PM
kato13's Avatar
kato13 kato13 is offline
Administrator
 
Join Date: May 2007
Location: Chicago, Il USA
Posts: 3,720
Send a message via ICQ to kato13
Default

There are reasons areas are populated (water, travel routes, temperature, fertile land, etc). There are also reasons to avoid areas that are massively populated now.

My personal thought is that you should base the projects personnel distribution on the when US population distribution flipped from rural to urban (for my calculations i used 1900). This actually predates the flip, but given some areas that were rural then, are urban now this pushes a few more assets away from strikes.

This allows for coverage of areas where significant people lived without an urban infrastructure, while allowing some teams to be close enough urban centers to work on recovering materials from the suburban rings.

That being said the North East is still a nightmare and I keep proportionally fewer teams in that area. I think New Jersey only had 2 teams as I could only find 2 locations more than 35 miles from a strike.
Reply With Quote
  #3  
Old 09-25-2015, 10:59 PM
RandyT0001's Avatar
RandyT0001 RandyT0001 is offline
Registered User
 
Join Date: Oct 2013
Posts: 254
Default

There are five megaregions in US that skew the placement of MP teams. They are Northeast, Florida, Southern California, Great Lakes, and the Texas Triangle. There is very little area untouched by the direct effects of the war in those region and I think that the MP would understand that and not waste personnel and teams in those areas. Too much risk of their destruction. This means that a 6 person team will have an even smaller area than a straight 3,000,000 square miles served by 1,500 boltholes and bases example I posted above.
Reply With Quote
  #4  
Old 09-27-2015, 11:36 AM
cosmicfish cosmicfish is offline
Registered User
 
Join Date: Mar 2015
Posts: 477
Default

The number of people in the Project is simply a multiplier to the distribution itself, and the distribution should be an attempt to place teams where they can survive the war and then provide the most immediate help to people at the time they are awakened. The first factor means moving teams out of suspected targets, the second means anticipating where survivors will be living 5 years (or whenever) after the war and placing teams in proportion.

So obviously there should not be any teams IN major cities or military bases or the such, and probably not any all that close to them, either - you have to account for a certain amount of error in missile targeting! But it is reasonable (to me, at least) that people will move the least distance they need in order to find a new place they can survive, so communities and regions surrounding those targets are most likely to grow in population while more isolated communities remain static. This would suggest rings of Teams around major metropolitan areas, decreasing in frequency out into rural areas.

Another issue is population density - a thousand people all clustered in one area are a lot easier to help than a thousand people spread over a thousand square miles! If we call the population density of any given area "D" and the population density of the US "D0" (currently around 85 / sq mi) then as a first order approximation you could scale the distribution by sqrt(D0 / D), to reflect that teams in less dense areas will spend more time travelling. This would mean that Florida, with D0/D ~= 1/4 would have half the Project personnel (by population) than the average, while Idaho, with D0/D ~= 4 would have twice the personnel (by population) compared to the average.
Reply With Quote
  #5  
Old 09-27-2015, 12:07 PM
ArmySGT.'s Avatar
ArmySGT. ArmySGT. is offline
Internet Intellectual
 
Join Date: Jun 2011
Location: Colorado
Posts: 2,412
Default

Well their are limitations to this........ population density, civilian infrastructure, government land, bodies of water, flood plains, mountainous terrain.

That should significantly reduce the overall terrain.
Reply With Quote
  #6  
Old 09-27-2015, 01:02 PM
kato13's Avatar
kato13 kato13 is offline
Administrator
 
Join Date: May 2007
Location: Chicago, Il USA
Posts: 3,720
Send a message via ICQ to kato13
Default

As I said before I distributed assets on 1900 population patterns.



This maps shows areas that were not generally populated without more advanced technology.

Breaking down the regions I would adjust team placement for the following.

Pop per sq mile
  • 0-2 - Generally not worth the projects attention. Unless there is a unique resource teams would be very sparse in these areas.
  • 2-18 - Migration support. These are areas which might be able to support a larger population with enhancements to infrastructure.
  • 18-45 - Population support. This is where I feel a bulk of the survivors will be. These are areas which can support communities but are not large enough to be primary targets.
  • 45-90 - Resource Recovery. Some of these areas will be able to support life but will probably have a breakdown due to a lack of ability for populations to feed themselves and the proximity to nuclear strikes. However there will be quite a few resources in these areas which will be useful to assist other populated zones.
  • 90+ - Highly targeted - Few project resources assigned simply due to the fact that most of the people and the resources in these areas will be destroyed by primary and secondary effects of the war.

These are of course generalizations. The West Coast and Florida would have had significant population growth. The overall strength of the Midwest particularly the 18-45 range can be seen though.
Reply With Quote
  #7  
Old 09-27-2015, 02:14 PM
RandyT0001's Avatar
RandyT0001 RandyT0001 is offline
Registered User
 
Join Date: Oct 2013
Posts: 254
Default

Here is a picture that shows federal lands in the US:

The article states that 28% of US land is federally owned which includes Alaska. If we assume that 1/3 of the land is unsuitable (mountains, federally owned, flood plain, etc.) for emplacement of MP teams then we would have about 2,000,000 square miles of area for the 1,500 teams. Each team now has 1333 square miles of area or about 36 miles by 36 miles.

In the grid below the same general region depicted in a previous post is shown with a grid of 36 miles by 36 miles square. The red squares, each 576 square miles in area, are placed where some of the major targeted cities are located. Each green square on the grid has a six man MP team assigned to it. Note that the density is greater. So what is your minimum distance from a potential target for your MP teams' bolt-holes?
Attached Images
 
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:37 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.