#61
|
||||
|
||||
Not to mention those magazines that went missing every so often...
__________________
I'm guided by the beauty of our weapons...First We Take Manhattan, Jennifer Warnes Entirely too much T2K stuff here: www.pmulcahy.com |
#62
|
|||
|
|||
I was always the devoted team and squad leader, giving up my BFA to the new boots who didn't have one so they could get the important training they needed. I was so selfless that way
__________________
"God bless America, the land of the free, but only so long as it remains the home of the brave." |
#63
|
|||
|
|||
When the pistol ban hit the Uk a few years ago, the poilce went round and took all the guns people had regardless of age etc. anything 9mm or modern did not all get destroyed.
1. the police took some into storage. 2. the police stole some and then sold them on. local officer got nicked for this around 12 months ago selling guns taken almost 6-8 years ago, and then destroyed! so what the govenment tells us and what the govenment does are two very different things. |
#64
|
||||
|
||||
Quote:
So, we usually spent 15 minutes clearing the mound followed by a swift echange of sandbags with the gun club. Everyone got what they wanted and a few drinks were passed round.
__________________
If it moves, shoot it, if not push it, if it still doesn't move, use explosives. Nothing happens in isolation - it's called "the butterfly effect" Mors ante pudorem |
#65
|
||||
|
||||
The Anniston, Alabama Army Arsenal was mentioned, but it should be further added that they are but one depot storing thousands of arms and ammunition (we're talking WWI/WWII/Korea/Vietnam surplus arms.) This is also the home of the Civilian Marksmanship Program's South Store where they sell thousands of rifles (M1 Garands, M1 Carbines, 1903 and 1903A3 Springfields and Model of 1917 Enfields) every year to the civilian market...along with millions of rounds of surplus and new ammunition (they also sell .22 target rifles, and used to sell custom match built Ar-15's.) This is just the program's south store...their north store is located at Camp Perry, Ohio (and they've tons of guns there...picked up a beautiful M1 Carbine from them last summer) These are what they have in stock...they've been selling rifles for decades so there are tons of rifles already in civilian hands that are chambered for common military calibers.
As far as constructing new ARs...lower receivers can be milled from an aluminum billet if you have modicum skill level. It was mentioned making cast moldings and screwing them together like a clamshell...this has been done by a private company already (and the BATFE shut them down promptly, but that is another story.) If you scan the internet, you will find that lower receivers have been milled from high density plastics, literally made out of plastic cutting boards. The real difficulty will be the upper receiver and barrels, although there are millions in surplus storage that could theoretically be pulled into service. The real problem will probably be transporting pieces from their storage depots to industrial areas. Small parts can be fabricated fairly effectively from other materials. I like the idea of stamped metal parts...AK receivers can be stamped and bent very easily...weld, screw or rivet. Again, barrels will be the hardest part. Any cartridge can be loaded with blackpowder versus smokeless...you just have to know the reloading differences and expect your semi-auto and automatics to very quickly become single shot repeaters. Black powder is incredibly caustic and care and maintenance will increase. Great topic! |
#66
|
|||
|
|||
Thus, I suggested the two substituites:
MINI 14 which can be milled from a smaller piece of metal and poof you have your reciever, tap and thread it for a barrel and screw in the barrel, the trigger assembly is the next major component and then a stock and a magazine and it is ready to go. AR-18; A stamped alternative to the M16 series. Stamped like the AK, with internal workings akin to the M240, simple, cheap and reliable but close to a M16 none the less. As for stocks, those are easy, you can make a traditional stock if you had the polymer, a tube style colapsible stock either plastic or metal. Or a fixed tube stock again made from tube stock, and the forgrip, a simple checkered or similiar pattern metal tube and you are good to go. As it said with the M16EZ you could also make woodenstocks for them which I have seen in real life which look pretty good.
__________________
"God bless America, the land of the free, but only so long as it remains the home of the brave." |
#67
|
||||
|
||||
Quote:
|
#68
|
||||
|
||||
Mr. Heston would be proud of you
|
#69
|
||||
|
||||
Thanks, I know the media wouldn't.
|
#70
|
||||
|
||||
|
#71
|
||||
|
||||
Kalos
this is an interesting thread though I haven't had a chance to read it all. I am a gunsmith by trade and I can give you my take on the circumstances of armament and firearms manufacture after the twilight war just repost what you would like to know. In reading some of the things you posted I can see you have a basic understanding of firearms manufacture. But one must consider the time and effort that goes into producing firearms.... consider today that most firearms are made using CNC machinery which has more to do with computer operation than knowing how to operate a milling machine. As for manufacturing M16 type rifles....I wouldn't even attempt it. Build one from exsiting components sure anyone could do and do. Infact AR's are one of the most popular rifles for civillians in the US to build. But to produce one from raw material would be very difficult. Also Assuming that an M1 would be easy to produce is also incorrect...first of all on an original M1 the reciever is made from a forging and then there are several hundred individual and complex milling process's. Also don't forget about the proper hardness of that milled reciever. When made today they are usually investment cast and then precision milled. LRB of long island makes a modern forged semi-auto only M14 reciever and it costs over a $1000 just for the reciever alone... Not even getting into how difficult it would be to make a barrel and yes I know people have been doing these sorts of things for hundreds of years but its not easy. Also there is going to be no shortage of firearms especially not in the US. What there will be a shortage of is ammunition. I own many many firearms but I only posses about 7,000 round of ammunition for my entire collection and that is somewhat unusual. Most people in the US have much less than 1000 rounds on hand for there firearms. I believe military weapons and calibers would be in the Majority not minority just due to the qauntity and availability of ammunition. 5.56x45(.223) 7.62X51(.308) are popular and going to be found in the US. Of course .30-06 is ubiqoutous here also even though is hasn't been used militarily for 40 years. I think you could arm your militia with many different types of firearms if you are so inclined. If you would like some good examples of rifles that might be used by a Militia in the U.S. let me know. |
#72
|
|||
|
|||
Quote:
No what happened was wrong on so many fronts, it has not stopped the illgeal weapons from being there, and a SMLE is so much more fun! Also England has a lot of guns for head of pop, same as English police are armed just they are better hidden, and not so many as the USA or Europe. An English A.R.V. Armed Responce Vehicle, has two officers, two MP5-A3's and 9mm pistols, CS gas, and stun guns. The training at county level is done by SAS trained firearm officers to a very high level. Responce to pretty much anywhere is around 20 mins with Helicopter support, just for you Merc or Spec ops fans |
#73
|
||||
|
||||
Lets hear it. After all, isn't sharing thoughts and opinions what this forum is all about?
__________________
If it moves, shoot it, if not push it, if it still doesn't move, use explosives. Nothing happens in isolation - it's called "the butterfly effect" Mors ante pudorem |
#74
|
||||
|
||||
Seconded
|
#75
|
||||
|
||||
Quote:
I understand why people don't challenge the government- it's scary and you will be made the bad guy by the media. Not just that, it's almost a sure trip to the grave if your lucky and prison if you aren't. I prey that bs doesn't happen in the States, but I know what my choice will be if it does- not trying to be a hard dog, but hay somebody has to jump in the fire. Sorry for your loss of freedom man. |
#76
|
||||
|
||||
Quote:
Here are a couple of older threads which are tangentally connected to this one Privately owned weapons in Europe? What happened to all those guns? |
#77
|
||||
|
||||
|
#78
|
|||
|
|||
Quote:
|
#79
|
||||
|
||||
Quote:
As always it is a shame when a few bad apples ruin things for everyone. |
#80
|
||||
|
||||
Purely in a T2k context, there is a possibility that handguns would never have been banned in the UK. The handgun ban came into effect in 1997, as a direct result of the 1996 Dunblane Massacre.
__________________
Author of the unofficial and strictly non canon Alternative Survivor’s Guide to the United Kingdom |
#81
|
||||
|
||||
Quote:
Since I Googled it I expect others would have. I remembered it but not the details. |
#82
|
||||
|
||||
Quote:
I strongly suspect that the overall number of privately owned firearms in my country remains at a large fraction of what it was before the really draconian gun laws were introduced, the only difference now is that most privately owned firearms here are illegally owned. I'm not a police officer or a statistician so this is my opinion only but I have anecdotal evidence. And as well, a number of times in the past decade I have been offered a variety of guns for purchase "under the table". Alot of people here were pretty miffed when the really strict gun laws came in but in Australian culture there has never really been rabid pro-gun lobby, well not loudly in public anyway. For most Australians Charlton Heston's "from my cold, dead hands" speech would be considered over the top, even a bit frightening. Different cultures, different norms, different forms of expression.
__________________
"It is better to be feared than loved" - Nicolo Machiavelli |
#83
|
||||
|
||||
Quote:
My bad...I should have elaborated...
__________________
Author of the unofficial and strictly non canon Alternative Survivor’s Guide to the United Kingdom |
#84
|
||||
|
||||
You have no idea where my mind went at first when I saw "BFA"...
__________________
I'm guided by the beauty of our weapons...First We Take Manhattan, Jennifer Warnes Entirely too much T2K stuff here: www.pmulcahy.com |
#85
|
||||
|
||||
When I was in, the attitude among the supply pogues was, "Guess you didn't need all those blanks, pyro, chemlights, etc. We'll allot you less next year." So definitely, everything "got used."
__________________
I'm guided by the beauty of our weapons...First We Take Manhattan, Jennifer Warnes Entirely too much T2K stuff here: www.pmulcahy.com |
#86
|
||||
|
||||
Quote:
Changing this type of thinking requires senior leadership to change their minds about how supply is run. In Twilight: 2000, every round is going to be counted when it comes to training. Simply burning up ammunition to keep the issue of ammunition the same won't be an option. I suppose, then, all it takes is a limited nuclear war for the resources to take on value. Webstral |
#87
|
|||
|
|||
[QUOTE=kato13;18808]Didn't mean to suggest that Briton did not have a strong gun culture. Sorry if it came off that way.
You did not, as a gamer for a lot of years and a GM of twilight for the last 20(ish), i believe that my game gets better by talking to other gamers, in the North East of England where I live the gaming community has shrunk over the years. I have never given much thought in my games for where the 'new' guns come from. Thankyou to all for making me think about topics like this. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|