Ammo reloading

[jester]

Shotgun shells are:

Aluminuim seen but not used.

Soft Steel shells, used they are okay.

Plastic, is the norm here in the US, reloadable, although I do not reload shotgun yet. I hear you can do it half a dozen times.

PAPER or Cardboard shells, used them. They work pretty well. Although of course caution should be used when using them around wet enviroments, these of course can not be reloaded.

Shotgun shells require,

The shell hull

Primer or Cap

Powder

Wadding

Shot

put in a new primer
add powder
wadding,
shot
crimp the top over

Its that simple.

And yes, you can use damn near anything as shot in a shotgun, dimes like on young guns, glass, nails, chain, lead, rocks dang near anything.



As for production numbers, I am using real world experience with common sense on how long it takes to put a round in a reloading press and pull the handle, with experience the numbers are greater.

As for the explosive manufacturing, again calipers, putting a item in a vice, hitting the balancer, pouring liquid into a mold, although the setting time for the liquid explosive is a guess. But anyone who has worked on an assembly line or in a similiar factory setting can tell you, you can become pretty fast doing the same motion over and over and over.

Further, if I had the data from Dillion Reloading they actualy give the output of rounds produced per minute.

As for my figures, I simply had a team, 1 person preforming each step in the cartridge assembly line. Giving them roughly 3 seconds per round which is rather long to be honest. that equals 20 rounds per minute, times 60 minutes times 8 hours.

so, 3 sec per round=20 rounds per minute

20 rpm times 60 minutes= 1200 rounds per hour

1200 times an 8 hour work day= 9600

So, 1 four man crew could have a quota of 9600 to 10,000 rounds per day.

And like I said with a progressive reloader and a support crew keeping the components ready you could probably put out een more rounds than that.